ATTENTION

Products shown may not be available in all countries. Indication claims may vary dependent on geography.

Coronary

ASAHI SION blue

First choice frontline guide wire designed to meet a wide variety of clinical needs, maintaining ASAHI SION's performance

Ease of use allows the physician to handle the wire exactly as intened.

■Safety
・There is no ACT ONE at the tip, therefore, this part is flexible, and when it gets caught or stuck on bifurcations, stress is released horizontally.

・The change in coating slightly reduces the lubricity, allowing for a safer to control wire.

・Tip load of SION blue is lower than SION, making the tip of SION blue safer.

■Device delivery
・In complex cases where support is needed, SION blue offers better solution

・In tortuous vessels, SION blue has superiority such as when deploying long stent

■Distinguishable
Different shaft color allows for differentiation of wires when performing the kissing balloon technique, anchor technique, or other operations requiring 2 or more wires

■SION series positioning

* All the data were obtained by company standardized test, which may differ from industry standardized tests.
* All the data do not prove that all devices have exactly the same performance with the samples used for these tests.

Technology

Product Spec

Tip Load 0.5gf
Tip Shape Straight / J-shape
Radiopaque Length 3cm
Coating Silicone+Hydrophilic
Usable Length 190cm / 300cm
Structure
Category

Order Information

Product Name Catalog No. Tip Shape Usable Length Outer Diameter Coil Length Radiopaque Length Coating Coating Length
ASAHI SION blue AHW14R104J J 190cm 0.36mm (0.014") 20cm 3cm Silicone+Hydrophilic 200mm
ASAHI SION blue AHW14R104S Straight 190cm 0.36mm (0.014") 20cm 3cm Silicone+Hydrophilic 200mm
ASAHI SION blue AHW14R304J J 300cm 0.36mm (0.014") 20cm 3cm Silicone+Hydrophilic 200mm
ASAHI SION blue AHW14R304S Straight 300cm 0.36mm (0.014") 20cm 3cm Silicone+Hydrophilic 200mm

“ASAHI”, “SION" and "ACT ONE" are are trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.
Coated with SLIP-COAT® coating.

The tip load values of our guide wires are the values assuming the force that the tip of the guide wire pushes the lesion on the basis of company standardized test.
There are individual differences in values of actual devices.

Inquiry about Asahi Intecc medical products

SHARE THIS PAGE