ATTENTION

Products shown may not be available in all countries. Indication claims may vary dependent on geography.

Peripheral

ASAHI Gladius 0.018

Enhanced device delivery type with great shaft support and maneuverability

■Moderate tip load with good support
4.0gf tip load for 0.018 inch make possible to use for a broad range of cases from simple stenosis to occluded lesions as a soft wire.

■Tip durability
High level retention of core wire due to ACT ONE.
Used for occluded lesion and muliti-vessel.

■Mini-preshape
Tip pre-shaped in the manufacturing process with a 1mm curve.
Easier to shape than shape manually.

■Polymer jacket for lubricity
Quickly cross even calcified lesions and fibrous occlusions.

■Pushability
Easy push force transmission due to balanced support shaft design.
Suitable for tortuous vessel and cross over approach due to the smooth shaft design.

*All the data were obtained by company standardized test, which may differ from industry standardized tests.
*All the data do not prove that all devices have exactly the same performance with the samples used for these tests.

Technology

Product Spec

Tip Load 3.0gf
Tip Shape Straight / Pre-shape
Radiopaque Length 4cm
Coating Polymer+Hydrophilic
Usable Length 200cm / 235cm / 300cm
Structure
Category

Order Information

Product Name Catalog No. Tip Shape Usable Length Outer Diameter Coating Coating Length Tip Load Coil length Radiopaque Length
ASAHI Gladius 0.018 PPW18R100P Pre-shape 200cm 0.45mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4gf 5cm 4cm
ASAHI Gladius 0.018 PPW18R100S Straight 200cm 0.45mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4gf 5cm 4cm
ASAHI Gladius 0.018 PPW18R200P Pre-shape 235cm 0.45mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4gf 5cm 4cm
ASAHI Gladius 0.018 PPW18R200S Straight 235cm 0.45mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4gf 5cm 4cm
ASAHI Gladius 0.018 PPW18R300P Pre-shape 300cm 0.45mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4gf 5cm 4cm
ASAHI Gladius 0.018 PPW18R300S Straight 300cm 0.45mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4gf 5cm 4cm

“ASAHI Gladius" is a trademark or a registered trademark of ASAHI INTECC.CO., LTD. in Japan and other countries.
Coated with SLIP-COAT® coating.

Inquiry about Asahi Intecc medical products

SHARE THIS PAGE