ATTENTION

Products shown may not be available in all countries. Indication claims may vary dependent on geography.

Coronary

ASAHI Gladius MG / MG ES

Broaden your approach to CTO cases

■Minimizing prolapse
Gladius MG has a modified distal core balance that minimizes a prolapse occurring in the tip.

■Excellent Durability
ASAHI Gladius MG maintains shape and guidewire performance even after crossing the lesion.

■High Lubricity
ASAHI Gladius MG has excellent lubricity that allows for smooth GW manipulation.

■Torque response
ACT ONE provides better torque response with no whip motion.

The above data was (All the data were) obtained by company standardized test, which may differ from industry standardized tests.
The above data (All the data) does not prove that all devices have exactly the same performance with the samples used for these tests.

Technology

Product Spec

Tip Load 3gf
Tip Shape Straight / Pre-shape
Radiopaque Length 3cm
Coating Polymer+Hydrophilic
Usable Length 190cm / 300cm
Structure
Category

Order Information

Product Name Catalog No. Tip Shape Usable Length Outer Diameter Coil Length Radiopaque Length Coating Coating Length
ASAHI Gladius MG AP14R023P Pre-shape 190cm 0.36mm (0.014") 8.5cm 3cm Polymer+Hydrophilic 41cm
ASAHI Gladius MG AP14R023S Straight 190cm 0.36mm (0.014") 8.5cm 3cm Polymer+Hydrophilic 41cm
ASAHI Gladius MG AP14R323P Pre-shape 300cm 0.36mm (0.014") 8.5cm 3cm Polymer+Hydrophilic 41cm
ASAHI Gladius MG AP14R323S Straight 300cm 0.36mm (0.014") 8.5cm 3cm Polymer+Hydrophilic 41cm
ASAHI Gladius MG ES AP14R024P Pre-shape 190cm 0.36mm (0.014") 3cm 3cm Polymer+Hydrophilic 10cm
ASAHI Gladius MG ES AP14R024S Straight 190cm 0.36mm (0.014") 3cm 3cm Polymer+Hydrophilic 10cm
ASAHI Gladius MG ES AP14R324P Pre-shape 300cm 0.36mm (0.014") 3cm 3cm Polymer+Hydrophilic 10cm
ASAHI Gladius MG ES AP14R324S Straight 300cm 0.36mm (0.014") 3cm 3cm Polymer+Hydrophilic 10cm

“ASAHI Gladius" and "ACT ONE" are trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.
Coated with SLIP-COAT® coating.

The tip load values of our guide wires are the values assuming the force that the tip of the guide wire pushes the lesion on the basis of company standardized test.
There are individual differences in values of actual devices.

Inquiry about Asahi Intecc medical products

SHARE THIS PAGE