ATTENTION

Products shown may not be available in all countries. Indication claims may vary dependent on geography.

Peripheral

ASAHI Gladius MG18 PV ES

Advancing a Tough Peripheral Intervention

Modified distal core with micro gap creates a narrow loop

Narrow Loop
・Micro Gap
By keeping a narrow loop when crosing the occluded lesion, GW is able to minimize resistance from the lesion.
It will be able to cross smoothly while avoiding subintimal space expansion.

■Lasting Lubricity
・Polymer jacket & Hydrophilic coating
Because of its high lubricity, ASAHI Gladius MG PV series is able to advance smoothly even in long occluded lesion.

■Tip durability
Creating narrow loop compare to competitors thus ACT ONE prevents deformation such as kink and torsion

■Mini Pre-shape
It can be shaped in a large curve accroding to the procedure, and also maintain high shape retention.

The above data was (All the data were) obtained by company standardized test, which may differ from industry standardized tests.
The above data (All the data) does not prove that all devices have exactly the same performance with the samples used for these tests.

Technology

Product Spec

Tip Load 3gf
Tip Shape Pre-shape / Straight
Radiopaque Length 4.5cm
Coating Polymer+Hydrophilic
Usable Length 190cm / 235cm / 300cm
Structure
Category

Order Information

Product Name Catalog No. Tip Shape Usable Length Outer Diameter Coating Coating Length Coil Length Radiopaque Length
ASAHI Gladius MG18 PV ES PP18R004P Pre-shape 190cm 0.46mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4.5cm 4.5cm
ASAHI Gladius MG18 PV ES PP18R204P Pre-shape 235cm 0.46mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4.5cm 4.5cm
ASAHI Gladius MG18 PV ES PP18R304P Pre-shape 300cm 0.46mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4.5cm 4.5cm
ASAHI Gladius MG18 PV ES PP18R004S Straight 190cm 0.46mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4.5cm 4.5cm
ASAHI Gladius MG18 PV ES PP18R204S Straight 235cm 0.46mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4.5cm 4.5cm
ASAHI Gladius MG18 PV ES PP18R304S Straight 300cm 0.46mm (0.018") Polymer Jacket + Hydrophilic Coating 10cm 4.5cm 4.5cm

“ASAHI Gladius" and "ACT ONE" are trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.
Coated with SLIP-COAT® coating.

The tip load values of our guide wires are the values assuming the force that the tip of the guide wire pushes the lesion on the basis of company standardized test.
There are individual differences in values of actual devices.

Inquiry about Asahi Intecc medical products

SHARE THIS PAGE