ATENCIÓN

Los productos mostrados pueden no estar disponibles en todos los países. Las indicaciones pueden variar dependiendo de la geografía.

Coronarias

ASAHI SION black

Alambre guía de vanguardia con envoltura de polímero para casos complejos.

Capacidad de seguimiento suave en su mano

■Lubricidad
Las características de la envoltura de polímero permiten una entrada y un cruce suaves en la lesión

■Flexibilidad de la punta
En comparación con los alambres con envoltura de polímero convencionales, ASAHI SION black es flexible lateralmente.
Esto aumenta la capacidad de seguimiento de vasos en lesiones tortuosas.

■Durabilidad
ASAHI SION black apenas se ve afectado por la curva.
La durabilidad de la punta de ACT ONE ayuda a mantener la operabilidad a través de vasos tortuosos.

The above data was (All the data were) obtained by company standardized test, which may differ from industry standardized tests.
The above data (All the data) does not prove that all devices have exactly the same performance with the samples used for these tests.

Tecnología

especificaciones del producto

Tip Load 0.8gf
Tip Shape Straight / Pre-shape / J-shape
Radiopaque Length 3cm
Coating Polymer+Hydrophilic
Usable Length 190cm / 300cm
Structure
Category

Información del pedido

Product Name Catalog No. Tip Shape Usable Length Outer Diameter Coil Length Radiopaque Length Coating Coating Length
ASAHI SION black APW14R010S Straight 190cm 0.36mm (0.014") 12cm 3cm Polymer+Hydrophilic 40cm
ASAHI SION black APW14R310S Straight 300cm 0.36mm (0.014") 12cm 3cm Polymer+Hydrophilic 40cm
ASAHI SION black APW14R010P Pre-shape 190cm 0.36mm (0.014") 12cm 3cm Polymer+Hydrophilic 40cm
ASAHI SION black APW14R310P Pre-shape 300cm 0.36mm (0.014") 12cm 3cm Polymer+Hydrophilic 40cm
ASAHI SION black APW14R010J J 190cm 0.36mm (0.014") 12cm 3cm Polymer+Hydrophilic 40cm
ASAHI SION black APW14R310J J 300cm 0.36mm (0.014") 12cm 3cm Polymer+Hydrophilic 40cm

“ASAHI”, “SION" and "ACT ONE" are trademarks or registered trademarks of ASAHI INTECC CO., LTD. in Japan and other countries.
Coated with SLIP-COAT® coating.

The tip load values of our guide wires are the values assuming the force that the tip of the guide wire pushes the lesion on the basis of company standardized test.
There are individual differences in values of actual devices.

Consultas sobre este producto

COMPARTIR ESTA PÁGINA